10 Ways Cavity Combiner N-F_SMA-F Connector 703M-2170MHz Small Volume JX-CC10-703M2170M-75NS3P

Description

10 Ways Cavity Combiner N-F_SMA-F Connector Operating 703M-2170MHz Small Volume 10 ways cavity multi-band combiner JX-CC10-703M2170M-75NS3P is one type of RF passive component designed & produced for sale by Jingxin, which especially features with low insertion loss less than 1.5dB, measured only 129mm x 79mm (90.0mm Max) x 240mm. The frequency of this broadband combiner covers from 703M-2170MHz, which works with peak power of 200W at the input port and 1000W at the output port. This combiner is produced with N-F_SMA-F connectors, but which can be switched to others according to the demand. With the painting in silver, such kind of cavity combiner can bear in the field for a long time. As promised, all the RF passive components from Jingxin have 3 years warranty.

Parameter

Electrical specifications @ TX
Parameter	700	850(B5)	900	1800	2100
Frequency range	758-803 MHz	869-880 MHz	925-960 MHz	1805-1880 MHz	2110-2170 MHz
Return loss	≥18 dB	≥18 dB	≥18 dB	≥18 dB	≥18 dB
Insertion loss	≤1.5 dB	≤1.5 dB	≤1.5 dB	≤1.5 dB	≤1.0 dB
Rejection at all stop bands	≥75 dB	≥75 dB	≥75 dB	≥75 dB	≥60 dB
Stop band ranges	703-748 MHz & 824-835 MHz & 880-915 MHz & 1710-1785 MHz & 1920-1980 MHz Note: For band 850, the stop band int the 900 band is not applied.
Coupling	60dB±8.0dB
Average power	+48dBm(60Watt) @ each input      +55dBm(300Watt) @ output
Peak power	+53dBm(200Watt) @ each input      +60dBm(1000Watt) @ output
Impedance	50 Ω

Electrical specifications @ RX
Parameter	850(B5)	900	700 & 1800 & 2100
Frequency range	824-835 MHz	880-915 MHz	703-748 MHz	1710-1785 MHz	1920-1980 MHz
Return loss	≥18 dB	≥18 dB	≥18 dB	≥18 dB	≥18 dB
Insertion loss	≤1.5 dB	≤1.5 dB	≤1.5 dB	≤1.5 dB	≤1.0 dB
Rejection	≥70 dB @ 758-803&869-880&1805-1880&2110-2170&2300-2400	≥70 dB @ 758-803&925-960&1805-1880&2110-2170&2300-2400	≥70 dB @ 758-803&869-880&925-960&2110-2170&2300-2400 ≥65 dB @ 1805-1880
Average power	+30dBm
Impedance	50 Ω

Custom RF Passive Components

As a manufacturer of RF passive components, Jingxin can design various ones according to the clients’ applications. Only 3 Steps to Solve Your Problem of RF Passive Component 1. Defining the parameter by you. 2. Offering the proposal for confirmation by Jingxin. 3. Producing the prototype for trial by Jingxin. Contact Us