160dBc Low PIM 5G Tappers Covering from 136-5930MHz

An “RF tapper” typically refers to a device or equipment used to tap into radio frequency (RF) signals. It is commonly used in the field of telecommunications and wireless communications. An RF tapper is designed to intercept or access RF signals without disrupting the original signal flow. It allows for monitoring or analysis of the signals being transmitted wirelessly. This can be useful for various purposes, such as network troubleshooting, signal analysis, or testing and measurement of RF equipment. 5G tappers are often used for 5G systems. They provide a means to observe and analyze RF signals without interfering with the intended communication or causing disruption to the network.

Differences between RF Signal Tappers and Directional Couplers

• Tappers usually operate over a broader frequency range
• Tappers do not have an isolated port, as a result, there is no isolation between the two ports
• Tappers are Bi-Directional, i.e the input and output ports can be switched. Directional couplers have a fixed, input and output port (Dual Directional and Bi-Directional Couplers are Bi-Directional)
• In tappers, the Input and Output ports have excellent VSWR but coupled port has bad VSWR. While in directional couplers all 3 ports have excellent VSWR
• Tappers are usually less expensive when compared to directional couplers

As a professional manufacturer of RF components, Jingxin design, produce tappers for various applications. Especially For 5G tappers in low PIM of 160dBc, it can meet with 5G solutions widely. If need more information about 5G tappers, pls feel free to contact us  sales@cdjx-mw.com